Grapple Buckets

CJJ Attachments
www.attachmentscjj.com
Moving materials like brush or logs can be a slow & awkward process, but the right grapple from CJJ, Inc. can be a time saver. Our skid steer grapple is built for both speed & versatility, and can mount to a wide range of CJJ, Inc. buckets or buckets with a 90-degree angle top bar. The grapple comes in standard widths of 50" or 60." The grapple can be welded to the bucket for solid mounting. As an added value, the grapple comes designed with a builtin, spring holder. The holder is securely fastened to the top of the grapple, and helps protect the hose from cylinders and materials like brush or gravel.

• Width: 50”, 60”
• Ram stroke: 8.25”
• Ram psi: 2,500
• Mounting: weld-on
• Approx. shipping weight: 370 lbs.

Eel River Steelworks
www.eelriversteel.com

EEL-CLAW GRAPPLE BUCKETS are available in: 60”, 66”, 72”, 80”, 85", 88", 96" & 120" widths. Standard buckets 60” through 72” use 1⁄2” x 6” cutting edge. 80” buckets are available with either 1⁄2” or 3⁄4” cutting edge. Our 85” and wider buckets are constructed using the 3⁄4” x 6” cutting edge. Buckets feature universal style quick tach hook up.


Options:

• 4” or 6” tine spacing
• Filler bars
• Removable or permanent side bars.
• Bolt-on teeth

Anbo Mfg.
www.anbomanufacturing.com

BG-XX
The ANBO bucket grapple provides a high strength, yet light weight bucket grapple that will easily attach to virtually any bucket. The grapple mounts by using either a bolt on method, or by welding it in place. This unit has many unique features in the design of which are patent pending. The tines are made of high strength but lightweight AR400 steel. This steel is rated at almost two times the Brinnell rating as that of T1, thus giving the grapple superior strength despite the lighter weight. The tensile strength of the metal is also 50% greater than T1. This enables the grapple to handle larger, heavier payloads without the risk of bending tines.

The tines have a serrated edge with protrusions that enable the product to bite into the load and hold tight to the material. The tines are set at 8" to enable the attachments to pick up smaller size material and clean areas thoroughly.

All moving points and pivots can be greased allowing for long life and resistance to wear. Because of the AR400 steel, this bucket grapple is lighter and still provides the strength
and durability for long service and better use.

The ANBO exclusive and versatile Split-Tooth tine can be used to rake forward. By resting the grapple stop against the bucket for back pressure support, the split-tooth can be used like bucket teeth to loosen soil and shallow rock. This allows provides greater versatility than any other bucket grapple.

VT Fabrication
www.vcutter.com

THE V GRAPPLE
The V Cutter is perfect for clearing CRP acres, fencelines,
acreages and hedgerows of unwanted trees and shrubs.
Whatever species of unwanted trees you have, the V Cutter
is the answer.

• Safe non-moving blades
• No cylinder cycle times between cuts
• Multi trees cut in seconds
• Cuts at or below ground level
• Long lasting high carbon steel blades
• Blades are reversible for even longer wear
• Replacement blades available
• Light weight (500 lbs) makes it practical for any size skid steer
• 2 pin quick hitch system to fi t most skid steer loaders
• All grapple pivot points are machined & greaseable for long life
• Heavy duty tubular steel frame
• Exceptional power for clamping and holding